Yokomo SD-008UCA Upper Arm for Drift Package PLUS Type C - Drift Tuners Choice  [SD-008UCA]

Yokomo SD-008UCA Upper Arm for Drift Package PLUS Type C
Price:
NZD$9.98
Brand:
Yokomo
Model:
SD-008UCA
GTIN:
0639342188925
Condition:
Brand New
Write a review

Refine Suspension Response with the Yokomo Upper Arm

The Yokomo SD-008UCA Upper Arm has been developed for the Drift Package PLUS Type C to give a dependable link for drift chassis. It keeps geometry options open so you can tune handling without altering core components.

Which Chassis It Works With

This upper arm fits the DP-DIB2, DP-DIB2R, DP-DIB2A, DP-DIB2RA, and DP-DP7C chassis, supporting a complete set for one car. Its mounting layout matches common DP configurations for easier swaps.

Practical Installation Advice

When installing the Yokomo SD-008UCA Upper Arm, hand-tighten first, then torque to your usual practice while checking link alignment. Fine adjustments to roll centre and toe will help you find the ideal drift balance.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Does this upper arm fit stock mounting points on DP chassis?

Yes, the part uses the same mounting pattern found on the stock upper arm for these DP models, so linkages and ball studs line up with minimal modification.

Can I use this arm with aftermarket turnbuckles and links?

The arm accepts standard link hardware at the factory mounting points, allowing common aftermarket turnbuckles to be installed for more precise adjustment.

Is any special setup needed after installation?

After fitting, perform a full alignment check and test runs at low speed to confirm toe and camber. Tweak settings gradually to suit your driving style.

What should I look for during routine maintenance?

Check for play at the ball end and any visible cracking or abrasion. Keep pivot areas clean and replace the arm if mounting holes elongate.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved