Yokomo SD-4134G Front Hub Carrier for DP-series Chassis (Graphite molded)  [SD-4134G]

Yokomo SD-4134G Front Steering Hub Carrier 4?(Graphite molded)
Price:
NZD$8.06
Brand:
Yokomo
Model:
SD-4134G
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - DP-AE86A category
Write a review

Adjustable front antiroll assembly

This graphite front steering hub carrier adds an adjustable antiroll mechanism to the front end so you can manage lateral roll while keeping normal longitudinal travel. Tuning is achieved by changing wire gauge and mounting position to alter lateral stiffness and response.

The set includes multiple wire diameters allowing incremental changes to roll stiffness; note the carrier may not be compatible with setups that use deep rim wheels due to clearance. Refer to the Compatible Models list below for exact fitment details.

Packing includes

  • Antiroll Bar Wire 1.0mm x 1
  • Antiroll Bar Wire 1.1mm x 1
  • Antiroll Bar Wire 1.2mm x 1
  • Antiroll Bar Wire 1.3mm x 1
  • Antiroll Bar Wire 1.4mm x 1
  • Antiroll Bar Wire 1.5mm x 1
  • Antiroll Bar Ball Stopper x2
  • Ball End Cap x2
  • Ball End x2
  • Antiroll Bar Holder x2
  • 3x3mm Set Screw x4
  • 3x4mm Set Screw x2
  • 3 x 12mm Set Screw x2
  • 3 x 8mm Button Head Screw x2

Compatible Models

  • DP-DP8
  • DP-GR35
  • DP-UF86A
  • DP-M786A
  • DP-HKS86A
  • DP-MKXA
  • DP-C33A
  • DP-SC430A
  • DP-TY180A
  • DP-JZX2A
  • DP-BNAA
  • DP-SDA
  • DP-EVXA
  • DP-DKPA
  • DP-BS15A
  • DP-REA7A
  • DP-DM13A
  • DP-ZCRA
  • DP-TYS15A
  • DP-BL34DA
  • DP-PS13A
  • DP-JZZ30A
  • DP-DR86A
  • DP-REAA
  • DP-ORCZ33A
  • DP-JZXA
  • DP-HKSA
  • DP-180SXA
  • DP-FC3SA
  • DP-S15A
  • DP-AE86A
  • MRTC-SD9
  • MRTC-86
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Can I install the SD-4134G on a DP-series without chassis modification?

In most cases the carrier mounts to standard DP-series locations, but you should check wheel clearance and mounting points before fitting. Cars that use deep rim wheels may require changes or will be incompatible.

How do the different wire sizes change handling?

Smaller diameter wires reduce roll resistance and give a softer lateral feel, while larger diameters increase roll stiffness; swap wires incrementally to evaluate handling changes on track.

Are the mounting parts included in the kit?

Yes. The kit supplies the antiroll wires, holders, ball ends and caps, ball stoppers, and the set screws and button head screws needed for installation as listed above.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved