Yokomo SP-USBP Program Adapter for PC Servo Configuration  [SP-USBP]

Yokomo SP-USBP jp
Price:
NZD$59.43
Brand:
Yokomo
Model:
SP-USBP
GTIN:
639342211487
Condition:
Brand New
Write a review
alt="Yokomo SP-USBP jp" title="Yokomo SP-USBP jp"
alt="Yokomo SP-USBP jp" title="Yokomo SP-USBP jp"

USB Link for Servo Parameter Editing

The Yokomo SP-USBP serves as a compact USB link to attach drift programmable servos to a computer so you can edit parameters and store backups. Plug the servo connector into the adapter and the adapter into a PC USB port to adjust control settings without extracting the servo from your model.

Through Yokomo's application, you can tune power output, set torque limits, reduce hunting, and change neutral width. Settings are writable to the servo and can be saved to the PC for later recall, helping reproduce the same setup across sessions.

Installation is straightforward: install the supplied Yokomo software on your computer, connect the SP-USBP to a USB port, then plug in the servo lead. Use the software interface to read current values, make adjustments, and write new profiles to the servo. The unit is a USB interface only and depends on the official software for functionality.

Intended for RC-scale use, the adapter must only be used with compatible programmable servos and is not suitable for full-size vehicle applications.

Specifications

  • Item Program adapter for programmable servos
  • Material Not specified
  • Model Number SP-USBP
  • Compatibility SP-02D, SP-03D

The SP-USBP simplifies servo calibration and lets you archive and load tuning files on your PC for consistent results.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How do I troubleshoot a connection that is not detected?

Confirm the Yokomo software is installed and running, ensure the SP-USBP is seated in a working USB port, and check the servo lead polarity and fit. Try a different USB port or cable if detection fails.

Which operating systems are supported by the application?

Refer to the Yokomo download page for current OS compatibility. The adapter itself is OS-agnostic, but the official software determines which systems can communicate with SP-USBP.

Is external power required for the adapter to function?

The SP-USBP acts as a communication interface; the servo requires its normal power source. Do not expect the adapter to supply servo power for high-load operations.

Are there risks using the adapter with non-RC equipment?

The adapter is designed for RC programmable servos only. Avoid connecting it to non-RC or full-size vehicle systems to prevent damage or unsafe operation.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved