Yokomo Y2-008FTBL Blue Short Front T Arm - RD/SD Handling Part  [Y2-008FTBL]

Price:
NZD$79.08
Brand:
Yokomo
Model:
Y2-008FTBL
GTIN:
639342227372
Condition:
Brand New
Write a review

Blue Front Lower T Arm for RD/SD Racing

The Yokomo Y2-008FTBL Front Lower Short T Arm is a practical upgrade crafted to refine steering accuracy and extend service life on RD/SD cars. The blue component is suited to tuners looking for predictable front-end behaviour.

Precision That Improves Cornering

Made with tight tolerances for RD/SD formats, the Y2-008FTBL reduces unwanted movement in the front end and improves corner entry control. Expect steadier mid-corner balance during spirited driving.

Compatibility Notes and Fitting Tips

This T arm matches many Yokomo RD and SD models listed below and installs using common RC fittings. Check alignment and roll centre after swap to dial in handling to your preference.

Compatible Models

  • RDR-020
  • DPR-GRA90R
  • DPR-GRA90W
  • DPR-GR86W
  • DPR-GR86G
  • DP-MS15
  • DP-GRA90W
  • DP-GRA90
  • DP-GR86
  • DP-GR86W
  • DP-GR86G
  • RDR-020G
  • SDR-030BL
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How difficult is the install for club racers?

For experienced club-level builders the swap is straightforward and can be completed trackside. Beginners should allow extra time to recheck setup settings.

Will this affect servo load or steering geometry?

The arm may slightly alter steering leverage depending on your servo and linkage. After fitting, verify servo centring and linkage lengths to keep steering neutral.

Can I use this part with aftermarket uprights?

Yes, it will work with many aftermarket front uprights, but double check clearance and pivot spacing to avoid bind or interference.

How should I maintain the T arm for long life?

Regularly inspect for wear at the pivot points and keep mounting hardware torqued correctly. Replace worn bushings or pins to retain precise steering.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved