Yokomo Y2-204323A 23mm Aluminium Servo Horn for YD-2 Slide Rack  [Y2-204323A]

Yokomo Y2-204323A Aluminum 23mm Clamp servo horn for YD-2 Slide rack (23T Airtronics/KO)
Price:
NZD$30.40
Brand:
Yokomo
Model:
Y2-204323A
GTIN:
0639342212743
Condition:
Brand New
Write a review
alt="Yokomo Y2-204323A Aluminum 23mm Clamp servo horn for YD-2 Slide rack (23T Airtronics/KO)" title="Yokomo Y2-204323A Aluminum 23mm Clamp servo horn for YD-2 Slide rack (23T Airtronics/KO)"
alt="Yokomo Y2-204323A Aluminum 23mm Clamp servo horn for YD-2 Slide rack (23T Airtronics/KO)" title="Yokomo Y2-204323A Aluminum 23mm Clamp servo horn for YD-2 Slide rack (23T Airtronics/KO)"

Sharper Steering Response with the Yokomo Y2-204323A Aluminium Horn

Swap out the factory resin horn on your YD-2 Slide Rack for the Yokomo Y2-204323A 23mm aluminium servo horn to gain improved stiffness and tactile feedback. The metal construction smooths out deflection under load, making steering inputs more predictable when running 23T spline servos such as Sanwa or KO.

Why Metal Improves Control

Aluminium offers a better strength to weight balance than resin, giving you steadier tracking and finer control at speed. The 23mm arm length is chosen to balance leverage and servo travel, helping drivers maintain precise lines without excessive servo movement.

Compatibility Tips and Fitting

Designed for 23T spline shafts, this horn works with popular servo models from Sanwa and KO. Installation is quick for most hobbyists using basic RC tools, and you should notice tighter steering and faster recovery in corner exits after the upgrade.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Can I use this on other drift cars?

It may fit other drift cars that share a 23T spline layout, but confirm geometry and clearance before fitting to avoid interference.

Will aluminium make my steering feel too stiff?

Aluminium reduces flex compared to resin, which increases responsiveness rather than making steering harsh; tuning ackermann and toe will help fine tune feel.

Any maintenance advice after fitting?

Periodically check mounting screws for tightness and inspect the horn for wear if you run impacts; aluminium is durable but fasteners can loosen over time.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved