Yokomo Y2-304A Aluminum Motor Mount for YD-2 Chassis  [Y2-304A]

Precision motor mount in aluminium for YD-2

This aluminium motor mount is produced as an aftermarket direct-fit option for the Yokomo YD-2 family of 1/10 scale drift chassis. It secures the motor inside the bay and establishes offset and alignment in relation to the spur/pinion or belt drive. The part is intended solely for model chassis applications and improves stiffness where the motor attaches.

Fitting is performed using the chassis motor mount points on supported YD-2 variants. Since chassis spacing and screw patterns can differ between DP and MRTC models, check alignment of the provided holes with your exact chassis before final assembly. The aluminium bracket replaces the standard plastic piece to reduce flex at the motor interface.

From a tuning viewpoint the component helps maintain repeatable motor positioning; the reduced deflection assists in keeping pinion-to-spur or belt alignment steady under load. After installing, confirm gear mesh or belt tension and run a brief test to ensure there is no shift in alignment.

Choose the Y2-304A when you need a firmer motor mounting option for Yokomo YD-2 variants; always verify hole alignment with your specific chassis and recheck drive mesh after initial testing.