Yokomo YOKB4-200FBG Front Brace (Graphite) for B-Max4III [YOKB4-200FBG]

Yokomo B4-200FBG - B-Max4III Graphite Front Brace

Price:

NZD$21.95

Brand:

Yokomo

Model:

YOKB4-200FBG

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the

Spares / Hop-ups - Yokomo - B-Max4

Graphite brace to tune B-Max4III front end

This graphite front brace produced by Yokomo fits the B-Max4III chassis and is used to stiffen the front area, altering handling balance for more predictable turn-in. The component affects how the front reacts to driver inputs and track surface changes.

Compatibility: marked for the B-Max4III, so it targets that chassis layout and mounting points. No additional adapters are presumed; always verify hole alignment on your front bulkhead before installation to avoid adding stress to screws or the chassis parts.

Fitting advice: use factory fasteners or screws with the same thread and diameter, tighten in small increments and watch preload to prevent compressing composite sections. Try small on-track adjustments to measure the effect of increased front stiffness on understeer and transient behavior.

Care instructions: graphite can sustain hairline damage from impacts; inspect after crashes. Clean with a soft brush and a mild composite-safe solvent, and recheck screw torque after initial running.

Remark :

Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How resistant is the graphite to impacts?

Graphite offers excellent stiffness but can develop hairline cracks on strong impacts. Inspect the brace visually after any heavy collision and replace if you find damage that could spread under load.

Will this part reduce understeer?

Increasing front stiffness can reduce front flex and may lessen understeer in many setups, but results depend on the rest of your suspension tuning. Test changes incrementally to reach the desired handling balance.