Yokomo YOKGT-24H GT500 Rear Hub Set (L/R)  [YOKGT-24H]

Yokomo GT-24H - GT500 Left and Right Rear Hub
Price:
NZD$17.14
Brand:
Yokomo
Model:
YOKGT-24H
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - GT category
Write a review

Rear hub role on GT500 chassis

The Yokomo YOKGT-24H left and right rear hubs are an RC-scale accessory made for compatibility with GT500 chassis. They form the connection between the rear wheels and the suspension, maintaining wheel position and enabling consistent setup adjustments.

These hubs are designed for direct swap or as an upgrade in GT500 touring layouts and play a part in adjusting rear camber, toe and roll-center during setup work. Fitment generally requires wheel and hub removal, insertion of the replacement hub into the hub carrier, and refitting using the original fasteners to keep alignment accurate; always follow the guidance in your chassis manual.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How long will these hubs last under regular track use?

The hubs are made for on-road touring loads and should offer good service life with normal driving. Inspect them periodically and replace if you notice wear or deformation.

Are bearings supplied with the hubs?

These hubs typically use the existing bearings from your GT500 chassis; fit new bearings only if the originals are worn or damaged.

Any tips for keeping alignment consistent after installation?

Reassemble with the original fasteners torqued to spec and check camber and toe with a gauge. Small, measured adjustments yield the most predictable handling changes.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved