Yokomo YOKRP-085350 Racing Performer Ultra Shock Oil 35wt for RC Shocks  [YOKRP-085350]

Yokomo RP-085350 - Racing Performer Ultra Shock Oils #35
Price:
NZD$18.51
Brand:
Yokomo
Model:
YOKRP-085350
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Precision silicone fluid for damping setup

Yokomo YOKRP-085350 Racing Performer Ultra Shock Oils #35 is a silicone-based lubricant made for RC shock absorbers to aid in fine tuning damping response. Use it when servicing or rebuilding shocks to tailor the feel for different surfaces or driving styles.

As a tuning consumable, this fluid changes the shock's damping characteristics rather than acting as a mechanical spare. It is suitable for typical hobby RC shock designs that accept silicone shock oil and is intended for model car use in various driving environments.

  • Purpose: Modify damping to influence handling and rebound when setting up the model.
  • Compatibility: Suitable for RC shocks that accept silicone oils; verify recommended weights in your shock documentation.
  • Installation notes: Remove old oil fully, refill slowly to the correct level, compress to expel trapped air, then reassemble and test.
  • Tuning role: Use #35 for moderate damping; combine with different springs or pistons to reach the desired ride and control.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How does Racing Performer Ultra Shock Oils #35 affect handling?

The #35 viscosity increases mid-range resistance in the shock, smoothing transitions and helping the car resist quick compressions while keeping reasonable rebound speed.

Any tips for filling shocks without trapping air?

Fill the shock slowly, tilt it while pumping the shaft to allow air to escape, and repeat compression cycles until no bubbles appear before sealing and fitting back to the car.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved