Yokomo YOKTS2129 Durable Full-Counter Universal Swing Shaft Steer Angle 55  [YOKTS2129]

Yokomo TS-2129 - Full counter universal Steer Angle 55
Price:
NZD$75.24
Brand:
Yokomo
Model:
YOKTS2129
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Durability-focused steering component

The Yokomo YOKTS2129 functions as an RC-scale swing shaft intended for maintenance and tuning of steering linkages. Its Full counter universal layout and Steer Angle 55 specification are designed to influence steering geometry rather than modify the drivetrain.

Offered as a universal-style drive/swing shaft for remote-controlled models, this part is suitable for replacing tired linkage pieces or for testing a different steering geometry during setup work. It is a model component and not for real vehicle applications.

Installation guidance: remove the necessary body or chassis panels to reach the steering linkage, double-check clearance for the Steer Angle 55 through full lock, and secure all fasteners to recommended torque where such figures are provided. Verify free movement across the steering range before operating.

Role in tuning: the Steer Angle 55 marking describes the part's intended steering geometry effect, helping hobbyists tune steering responsiveness and tie-rod movement; implement changes gradually to isolate handling differences and watch for binding under suspension travel.

Specifications

  • Item: Full counter universal steer angle swing shaft
  • Model Number: YOKTS2129
  • Part Type: Swing shaft / Drive shaft set
  • Brand: Yokomo

Select this swing shaft when you want a robust, model-scale replacement or a controlled steering-angle option for methodical tuning, and always confirm fitment on your chassis before track use.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How does this part fare under heavy use?

The design is intended for repeated model use; inspect bearings and joints routinely and replace components showing play to maintain predictable steering action.

Are replacement components available if a joint wears?

Wear items like pins and cups may be serviceable depending on your supplier; keep spares for common wear parts to reduce downtime.

What checks prevent premature failure?

Regularly verify fastener security, look for play in ball joints, and keep pivot areas free of grit to minimize accelerated wear.

Is lubrication recommended for this shaft?

A light, appropriate lubricant on moving joints can extend life; avoid heavy greases that attract dirt in dusty conditions.

Will the Steer Angle 55 cause extra stress on other parts?

Changing steering angles can alter load paths; inspect related linkages and mounts after fitting to ensure no new interference or excessive load points appear.

How often should I inspect the YOKTS2129 on a race car?

For high-use models check the swing shaft after every few sessions, and perform a full inspection after any heavy impact to catch early signs of wear or deformation.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved