Yokomo YX-24S Graphite Rear Axle for YR-X12/YR-X1219 1/12 Replacement  [YX-24S]

Yokomo YX-24S Graphite Rear Axle for YR-X12
Price:
NZD$26.05
Brand:
Yokomo
Model:
YX-24S
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - YRX12 category
Write a review

Graphite Rear Axle - Yokomo YX-24S

The Yokomo YX-24S Graphite Rear Axle serves as a replacement rear axle for the YR-X12 family of 1/12 competition vehicles. Constructed from graphite, the axle is supplied to match the chassis mounting arrangement and is intended for use during maintenance, setup changes, or part replacement on the track.

Installation notes: measure and align the axle to the YR-X12 and YR-X1219 mounting points, ensuring correct engagement with adjacent drivetrain parts. During installation inspect the bearings and mounting hardware and perform a slow rotation test to confirm smooth operation before running at speed.

Specifications

  • Item Yokomo YX-24S Graphite Rear Axle
  • Material Graphite
  • Model Number YX-24S
  • Compatibility YR-X12, YR-X1219

Compatibility

  • YR-X12
  • YR-X1219

Intended as a direct graphite swap for YR-X12 series 1/12 competition chassis, this axle supports routine repairs and setup trials; always check part clearances with your existing drivetrain before final assembly.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How should I verify fitment on a YR-X1219 before tightening?

Begin by placing the axle into the mounting points without final fasteners, check lateral and rotational clearances, then gently secure hardware and re-check alignment at low speed to confirm nothing binds.

What pre-install checks are recommended for this axle?

Inspect bearings and mating surfaces for wear or damage, verify that the axle datum points match the chassis, and ensure any shims or spacers used previously are accounted for during reassembly.

Will I need new bearings to fit the YX-24S?

The listing does not include new bearings. If your current bearings show play or roughness, replace them before fitting to ensure reliable operation.

Can swapping to this axle change handling?

Yes, changing the rear axle material or geometry can subtly affect rear traction and chassis balance; use controlled test runs to evaluate any handling changes after installation.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved