Yokomo YZ-202G 2.0mm Graphite Bellcrank Support for Works'91 TeamSpec  [YZ-202G]

Yokomo YZ-202G Graphite Bellcrank Support (2.0mm) for Works\\\'91 TeamSpec
Price:
NZD$22.45
Brand:
Yokomo
Model:
YZ-202G
GTIN:
3888
Condition:
Brand New
Quantity Discount
Unit Price You Save
2 $36.10 each $-27.27 or -61%
3+ $31.18 each $-26.17 or -39%
Write a review

2.0mm graphite steering support for Works'91

The Yokomo YZ-202G serves as a graphite brace positioned between the front bulkhead and upper deck to secure the top section of the steering post. Its 2.0mm thickness lowers deflection at the steering pivot, helping deliver a more controlled and repeatable steering feel.

To fit, place the plate above the steering post upper journal and clamp it with the existing chassis hardware; no extra components are necessary. Because this piece is structural, any handling changes stem from increased front-end stiffness rather than a change in steering geometry.

For setup, install the plate and trial with your standard tyre choice and toe settings before altering suspension or steering. Make incremental adjustments and evaluate the effect on turn-in and mid-corner stability.

Specifications

  • Item: Graphite Bellcrank Support (2.0mm)
  • Material: Graphite
  • Model Number: YZ-202G
  • Compatibility: YZ-W91TS, YZ-W91

Compatible Models

  • YZ-W91TS
  • YZ-W91

Designed for racers seeking a stiffer steering assembly on YZ-W91 series chassis, this plate lets you tune steering responsiveness more precisely while keeping original geometry intact.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will this plate improve steering precision?

Yes. By reducing flex at the upper journal the YZ-202G tightens up the steering feel, improving precision at corner entry and through turn-in.

Does installation require drilling or trimming?

No additional drilling is required. The part is designed to be sandwiched using the stock hardware and fits into the existing chassis stack-up.

How durable is the graphite under race conditions?

Graphite is stiff and light, but it can be vulnerable to concentrated stress. Use correct torque and inspect after impacts to maintain reliability.

Any setup advice after fitting?

Start with your usual setup and make small changes to toe and front roll stiffness. Evaluate changes gradually to understand how the plate alters turn-in and mid-corner behaviour.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved