Yokomo Z2-413G3A Graphite Steering Knuckle for YZ-2DTM3.1  [Z2-413G3A]

Yokomo Z2-413G3A Steering hub carrier/Buhsing (3pin/Graphite mold) for YZ-2DTM3.1/CAL3.1
Price:
NZD$24.28
Brand:
Yokomo
Model:
Z2-413G3A
GTIN:
0639342216628
Condition:
Brand New
Write a review

Precision Steering Knuckle in Graphite Composite

The Yokomo Z2-413G3A hub carrier fits the YZ-2DTM3.1 and CAL3.1 chassis and is moulded from a graphite-infused composite to reduce flex at the steering joint. That added rigidity produces crisper turn-in and steadier mid-corner control. The unit uses a 3mm diameter suspension pin, and you can adjust the arm tip height by changing the bushings to dial in handling for different surfaces.

Compatible Chassis

  • B-YZ2DTM31-1
  • B-YZ2CAL31-1
  • SOR-010
  • ROR-010
  • ROR-010RTR
  • ROR-010RTR-1
  • SOR-020
  • SOR-020D
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is the Z2-413G3A stronger than stock parts?

Compared to typical injection-moulded hubs, the graphite composite offers higher local stiffness which can reduce unpredictable steering under load.

Can I use my existing pins and bushings?

The carrier accepts standard 3mm suspension pins; you can retain current pins but swapping bushings is recommended for setup changes.

What track conditions suit this part best?

It works well on tighter, technical layouts where steering precision and reduced flex improve lap consistency. Test on varied surfaces to confirm gains.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved