Yokomo ZC-A2510A 2.5x5x1.0mm Blue Shim for Drift and Track  [ZC-A2510A]

Yokomo ZC-A2510A Blue 2.5x5x1.0mm Shim
Price:
NZD$8.26
Brand:
Yokomo
Model:
ZC-A2510A
GTIN:
0639342197071
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Setup Shim Designed Around Yokomo ZC-A2510A

Specifically sized at 2.5x5x1.0mm, the Yokomo ZC-A2510A blue aluminum shim is made to assist precise suspension trims on DP-DIB2 and YD2 series chassis. Its consistent thickness helps you refine chassis rake and corner balance for more repeatable handling.

Lightweight Precision for Tuning

The aluminium construction keeps weight low while offering good durability for regular setup work. A pack of eight shims makes it straightforward to test small changes at the upper arm or mount points to tune steering response and mid corner grip.

Chassis Compatibility

  • DP-DIB2A
  • DP-DIB2
  • DP-DIB2R
  • DP-DIB2RA
  • DP-YD2
  • DP-YD2G
  • DP-YD2PLS
  • DP-YD2EX
  • DP-YD2S
  • DP-YD2SG
  • DP-YD2S-PL
  • DP-YD2SX
  • DP-YD2E
  • DP-YD2EG
  • DP-YD2EPLS
  • DP-YD2EX2
  • DP-YD2ES
  • DP-YD2SS
  • DP-YD2SX2
  • DP-YD2EXB
  • DP-YD2RPLS
  • DP-YD2SX3
  • DP-YD2SX3R
  • DP-YD2SX3P
  • DP-YD2AC
  • DP-YD2RAR
  • DP-YD2RAB
  • DP-YD2RAP
  • DP-YD2SAB
  • DP-YD2SAR
  • DP-YD2SAP
  • DP-YD2SSAB
  • DP-YD2SSAR
  • DP-YD2SSAP
  • DP-YD2RSAB
  • DP-YD2RSAR
  • DP-YD2RSAP
  • DP-YD2ACA
  • DP-YD2SAC
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How does thickness change handling?

Adding or removing 1.0mm shims alters suspension geometry slightly, affecting roll centre and weight transfer which changes corner entry and mid corner balance.

Are these suitable for drift cars?

Yes, the shims are commonly used in drift setups to tweak steering angle and tyre load; they are compatible with many YD2 style drift platforms.

Do I need special tools to fit them?

No special tools are required beyond basic RC setup tools. Use a clean workspace and a small pick or tweezers to position shims without contaminating bearings.

Will aluminium shims compress over time?

Aluminium shims do not compress like soft plastics; they remain dimensionally stable, though remove and inspect them during routine maintenance for any edge wear.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved