Yokomo ZC-S100A Shim Set 0.13/0.25/0.50mm (10pcs Each)  [ZC-S100A]

Yokomo ZC-S100A 10.0 Spacer 0.13/0.25/0.50 10pcs.each
Price:
NZD$8.95
Brand:
Yokomo
Model:
ZC-S100A
GTIN:
0639342218882
Condition:
Brand New
Write a review
alt="Yokomo ZC-S100A 10.0 Spacer 0.13/0.25/0.50 10pcs.each" title="Yokomo ZC-S100A 10.0 Spacer 0.13/0.25/0.50 10pcs.each"

Precision Shims from Yokomo ZC-S100A for Careful Tuning

If you need to make fine adjustments to your model, the Yokomo ZC-S100A spacer set provides accurate shims in three thicknesses: 0.13mm, 0.25mm and 0.50mm. The 10.0mm inner diameter fits a variety of shafts and hubs, allowing small changes without replacing larger parts.

Use Cases for On-Road and Off-Road Setups

The spacers work well for trimming suspension geometry, changing preload or correcting minor alignment issues. Each thickness comes as multiple pieces so you can experiment across several vehicles or setups during a test session.

Easy to Integrate for Frequent Modifiers

Hobbyists who swap parts often will appreciate the control these shims offer. Their 10.0mm bore size makes them compatible with many standard RC components, helping you refine handling and mechanical fit without major disassembly.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How do spacers affect handling?

Adding or removing spacers can change roll center, camber link position and clearance, which in turn affects turn-in and mid-corner balance.

Are these shims suitable for bearing preload?

Yes, they can be used to set bearing preload or eliminate slop where small spacing changes are required, provided the diameter matches your assembly.

Can I cut or trim these spacers?

Trimming is not recommended unless you have a steady hand and correct tools; altering the shim can change its thickness and performance unpredictably.

What materials should I match them with?

Pair these spacers with compatible metal or composite parts that accept a 10.0mm bore and avoid mixing with worn components that could cause uneven loading.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved