Yokomo ZC-S50A 5.0mm Shim Set 20pcs Per Thickness 0.13/0.25/0.50mm  [ZC-S50A]

Yokomo ZC-S50A 5.0 Spacer 0.13/0.25/0.50 20pcs. each
Price:
NZD$8.95
Brand:
Yokomo
Model:
ZC-S50A
GTIN:
0639342219049
Condition:
Brand New
Write a review
alt="Yokomo ZC-S50A 5.0 Spacer 0.13/0.25/0.50 20pcs. each" title="Yokomo ZC-S50A 5.0 Spacer 0.13/0.25/0.50 20pcs. each"

Dial In Setup with Yokomo ZC-S50A Shims

The Yokomo ZC-S50A spacer kit gives precise shims for small setup corrections on a wide range of RC cars. The set includes Φ5.0mm spacers in three gauges: 0.13mm, 0.25mm and 0.50mm, with 20 pieces of each for repeatable tuning sessions.

Works Across Many Chassis Types

These shims are useful for adjusting suspension geometry and wheel alignment. They are compatible with chassis such as YR-10F, YR-X12, YR-X1219, MRTC-BD7RS, MRTC-BD7RS2 and MRTC-BD7RS3S and suit other platforms that accept Φ5.0mm spacers.

Everyday Tuning and Setup Advice

Use the thin 0.13mm shims for subtle changes and step up to 0.25mm or 0.50mm for larger corrections. They make it straightforward to fine-tune camber, caster and clearance without complex tools.

Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.
If the hub or shaft bore is 5.0mm and there is enough outer clearance, these shims will fit. Always check the mating parts for interference before final fitting.
Yes, stacking is common practice. Combine 0.13mm and 0.25mm for in-between values, but ensure stacked shims remain stable and do not shift under load.
Bringing a few extra pieces of each thickness is wise. The kit already contains 20 of each, but having spare individual shims can save time if you lose or damage any at the track.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved