Yokomo ZC-T3610A 3x6x1.0mm Teflon Suspension Spacer Pack  [ZC-T3610A]

Yokomo ZC-T3610A Teflon suspension arm spacer 3x6x1.0mm
Price:
NZD$13.59
Brand:
Yokomo
Model:
ZC-T3610A
GTIN:
0639342219339
Condition:
Brand New
Write a review

Tune Suspension Play with Yokomo ZC-T3610A

For fine suspension adjustments on touring and drift machines, the Yokomo ZC-T3610A Teflon Suspension Arm Spacer is a practical choice. These components are moulded from Teflon resin and sit between the arm and the mount to cut rubbing and improve pivot freedom during changes in speed.

Where These Spacers Work Best

They are particularly useful when you need to tweak wheelbase or clearance without adding stiffness to the linkage. Each set contains ten spacers, each with a 3mm inner bore, a 6mm outer diameter and a 1.0mm thickness, suitable for a wide array of 1/10 scale cars.

What Teflon Brings to the Table

The low friction nature of Teflon helps suspension parts move consistently, reducing binding that can upset handling. This makes it a dependable option for both competitive runs and track practice.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will Yokomo ZC-T3610A spacers change drivetrain feel?

They are focused on suspension pivots rather than the drivetrain, so any change to drivetrain feedback should be minimal while steering and suspension feel becomes smoother.

Can I stack multiple spacers for custom thickness?

Yes, you can layer more than one spacer to achieve the desired clearance, just check that the bolt or pin length and surrounding geometry allow for extra thickness.

Are these suitable for wet or dusty running?

Teflon performs well in many conditions, but routine inspection and cleaning are recommended after wet or dirty use to maintain smooth operation.

Do they fit plastic and aluminium mounts?

Yes, the spacers work with both plastic and metal mounts as long as the pivot diameter is 3mm and there is sufficient clearance for the 6mm outer diameter.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved