YRF 001 Series Compatible High Nose Formula Body Shell - Yokomo YOKYF01HN  [YOKYF01HN]

Yokomo YF-01HN - Formula High Nose Body for YRF 001 Series
Price:
NZD$46.79
Brand:
Yokomo
Model:
YOKYF01HN
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

1/10 High-Nose Shell Tailored to YRF 001 Series

This 1/10-scale on-road body shell has been formed to suit YRF 001 Series chassis types, providing a pronounced high-nose contour that changes leading-edge airflow compared with conventional formula shells. It is supplied as an aftermarket accessory for fitment and tuning trials rather than a one-size-fits-all option.

Fitting is done in the usual lexan body fashion: line the shell up with the chassis mounting posts, mark and create mounting holes to the chassis pattern, and trim wheel wells and suspension clearance gradually. Keep the areas around post mounts and the headrest intact during most trimming to secure a repeatable fit.

From a setup perspective, the high-nose contour shifts airflow over the front end and can modify aerodynamic loading on turn-in and mid-corner phases. Compensate changes through body mounting height, ride height and any available front wing adjustments after install.

Specifications

  • Item: 1/10 on-road formula high-nose body shell
  • Model Number: YOKYF01HN
  • Compatibility: YRF 001 Series

Ideal for enthusiasts trialing aero changes at the chassis level, this high-nose shell lets you examine front-end behavior on YRF 001 Series cars; perform fit checks and small trims before painting and track use.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will the high-nose shape be fragile around trimmed sections?

When trimming, avoid removing excess material near post mounts and the headrest; these zones give the shell its structural support and reduce the risk of cracking under load.

How can I reinforce thin edges?

After trimming, consider heat-forming or applying polycarbonate tape to vulnerable edges and masked areas to improve impact resistance during running.

Is special paint needed for strength?

Use paints formulated for lexan; they flex with the shell and do not embrittle the material. Apply light coats and allow full cure between layers.

What's the best storage method to avoid warping?

Store the shell flat or suspended on soft supports away from direct heat and sunlight to prevent softening or distortion of the polycarbonate.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved