YS Engine YSE2132 Insulator for DZ170 CDI Carburettor - RC Spare  [YSE2132]

YS ENGINE CARBURETOR INSULATOR DZ170 CDI #E2132
Price:
NZD$24.71
Brand:
YS Engine
Model:
YSE2132
GTIN:
4560105741360
Condition:
Brand New
Write a review

Fit and tuning notes for DZ170 CDI

The YS Engine YSE2132 insulator is manufactured to fit DZ170 CDI carburettors and provides a buffer between the carburettor and engine case to reduce heat soak and vibration transfer while running.

For fitting, ensure both mating faces are clean, place the insulator against the engine mounting flange, align the bolt holes, and tighten fasteners evenly to maintain a secure seal. After installation, verify idle and low-throttle behavior on a test stand before regular use.

During tuning and upkeep the insulator aids stable carburettor mounting and can help preserve steady idle and mixture under load, but it does not replace proper synchronization or routine fuel system inspections.

Can the insulator affect idle and mixture during tuning?

Yes, by stabilising the carburettor mounting the YSE2132 can reduce vibration-related mixture shifts, but final idle and mixture adjustments still require proper tuning and synchronization.

Any bench checks recommended after fitting?

After installation run the engine at idle and low throttle on a stand to confirm steady running and to inspect for air or fuel leaks before normal operation.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved