YZ-2CA/2DT/YZ-4 Compatible Aluminum Bellcrank - Z2-201BA2 Yokomo  [Z2-201BA2]

Precision aluminium bellcrank for YZ platforms

Built for RC off-road cars, this aluminium bellcrank replaces the standard resin steering arm on the noted YZ chassis. The metal body increases rigidity compared with the original, which can sharpen steering input and reduce unwanted movement during heavy cornering.

The bellcrank is fitted with a larger support bearing than previous variants, boosting pivot durability. As an aftermarket accessory for electric models, confirm how it mates with your current steering links and servo horn before final assembly.

Installation tips: follow the chassis manual to remove the stock unit, move across any bearings or shims that must be reused, and secure the aluminium bellcrank with the original fasteners. Re-centre your servo and check travel limits after fitting, adjusting transmitter trim and end-points as required. Pairing this bellcrank with stiffened steering links will make the most of the reduced flex.

Care: periodically inspect the pivot and bearing for grit or wear, keep mating surfaces free of contaminants, and verify bolt torque after initial test runs.