YZ-2DTMW Compatible Aluminum Rear Suspension Mount (Front side) - Yokomo Z2-300RF4A  [Z2-300RF4A]

Price:
NZD$30.51
Brand:
Yokomo
Model:
Z2-300RF4A
GTIN:
0639342195732
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - Off-Road Suspension Parts category
Write a review

Aluminium Rear Pickup (Front side)

The Yokomo Z2-300RF4A is an aluminium rear suspension mount made for touring car chassis. It is the front-side pickup specified for the YZ-2DTMW platform and can be used as a replacement or a sturdier upgrade to the plastic factory part.

Designed to pair with the resin bush S4-300BS, this mount provides lateral control while preserving adjustable link geometry. The assembly helps keep pivot points consistent when the car is under load, aiding setup repeatability.

As a chassis-level component it locates the suspension links, mates with bulkhead mount points, and supports consistent geometry when arms or link lengths are changed. The aluminium material increases wear resistance and maintains accurate dimensions better than stock plastic.

Specifications

  • Item: Yokomo Z2-300RF4A Aluminum Rear Suspension mount (Front side)
  • Material: Aluminum
  • Model Number: Z2-300RF4A
  • Compatibility: B-YZ2DTMW, B-YZ2DTM2, B-YZ2CAL2, B-YZ2CA, B-YZ2DT, B-YZ2DTM

Compatible Models

  • B-YZ2DTMW
  • B-YZ2DTM2
  • B-YZ2CAL2
  • B-YZ2CA
  • B-YZ2DT
  • B-YZ2DTM

Select this mount when you want a firmer front-side rear pickup that teams with the S4-300BS resin bush to protect geometry through setup and track use.

Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How do I fit the Z2-300RF4A to the YZ-2DTMW bulkhead?

Remove the original front-side pickup, align this aluminium mount with the bulkhead mounting holes and secure using the same fasteners. Ensure the S4-300BS is seated correctly before tightening.

Should I use thread locker or shims when installing?

Apply a drop of medium-strength thread locker to the mounting screws if you race frequently; shims can be used to fine-tune link alignment if needed.

Does the S4-300BS need lubrication?

Resin bushes typically run dry, but a light application of plastic-safe grease can reduce squeak and wear if you prefer smoother movement.

Will this mount affect cornering balance?

Stiffer mounting points reduce unwanted flex, which can make cornering behaviour more predictable; you may need to fine-tune toe or camber to match your setup.

What checks keep the mount performing well?

Regularly inspect the bush for wear, confirm screw torque, and check that pivot locations remain free of play to preserve geometry.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved