YZ-W91TS Direct-Fit 2.5mm Graphite Chassis for YZ-W91/YZ-W91TS - Yokomo YZ-002GW1  [YZ-002GW1]

Yokomo YZ-002GW1 Graphite Main Chassis (2.5mm) for Works\\\'91 TeamSpec
Price:
NZD$166.23
Brand:
Yokomo
Model:
YZ-002GW1
GTIN:
3888
Condition:
Brand New
Write a review

Precision graphite plate for YZ series chassis

The Yokomo YZ-002GW1 main chassis is manufactured as a 2.5mm graphite replacement for the YZ-W91TS platform. It delivers a firmer stiffness profile that helps maintain consistent handling and predictable flex behavior. The design retains original mounting and cutout locations so builders can alter stiffness without changing geometry.

Installation is straightforward on the specified YZ-W91TS or YZ-W91 frames when using the stock hardware. During installation, align motor mount, servo and battery tray before final tightening. Note that a stiffer plate changes load paths through the car, so inspect chassis and suspension components after the first test runs.

Specifications

  • Item Main chassis
  • Material Graphite
  • Model Number YZ-002GW1
  • Compatibility YZ-W91TS, YZ-W91

Use the YZ-002GW1 when you want a 2.5mm stiffness profile on YZ-W91TS or YZ-W91 builds to increase rigidity without changing the mounting layout.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How resilient is the 2.5mm graphite to impacts?

The 2.5mm graphite offers good stiffness for track use but is less forgiving than thicker composite plates under heavy impacts. Inspect for cracks after significant collisions.

Can I tidy edges or remove burrs?

Small edge finishing is acceptable, but avoid enlarging mounting holes or altering the hole positions which could affect fit.

Will a stiffer chassis stress mounts or screws?

Increased rigidity can concentrate loads at fasteners and mounts. Check torque and consider using washers to spread load if needed.

What routine checks are recommended after fitting?

After initial runs, recheck fastener torque, look for hairline fractures, and confirm no wiring or chassis edges are rubbing sensitive parts.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved