Zaku II MS-06R-1A (Universal Century) MG 1/100 - Anavel Gato Custom Kit Bandai 5065584  [B-5065584]

Price:
NZD$91.68
Brand:
Bandai
Model:
B-5065584
Condition:
Brand New
Available in shop
Write a review

Zaku II MS-06R-1A - precision MG 1/100 interpretation

This is a Master Grade 1/100 Gunpla representing the MS-06R-1A Zaku II tailored to Anavel Gato. The kit translates the performance-oriented MS-06R lineage into a finely engineered MG internal frame with numerous separate parts for visual accuracy and articulation.

Build notes and tool suggestions

Recommended build level: advanced. Use nippers, a hobby knife, fine files, and sanding paper for clean part separation. Panel line pens and masking tape are suggested for refined finishing and paint masking.

Preparation for paint and decals

Minimal seam touching is optional, depending on the builder's finish goals. Decal application and a clear topcoat help integrate varied plastic colours and protect painted surfaces during handling.

Specifications

  • Scale: 1/100
  • Grade: MG
  • Build Level: advanced

As a Master Grade 1/100 kit, this release focuses on internal-frame articulation and part separation to represent the MS-06R-1A's high-performance character.

Sharp plastic nippers used close to the part, followed by a thin hobby knife and progressively finer files or sanding sticks, yield the cleanest edges before final sanding and primer.
Reinforcement methods such as pinning or adding small shims can improve tightness in stress points. Builders often test-fit parts and, if needed, use thin plastic strips or adhesive to limit unwanted play.
Thorough degreasing, light seam filling, and sanding to key the surface are recommended. A primer suited to the chosen paint system will ensure even coverage and adhesion.
Many common 1/100 action bases fit directly, but specialised aftermarket supports or poses with heavy weapon loads may require an adapter to ensure secure attachment.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved