Tamiya 84294 - 1/10 TA05-VDF II Limited Edition Carbon Fibre Drift Kit  [84294]

Tamiya 84294 - 1/10 RC TA05-VDF II Drift Chassis Kit (Limited Edition)
Price:
NZD$654.18
Brand:
Tamiya
Model:
84294
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="Tamiya 84294 - 1/10 RC TA05-VDF II Drift Chassis Kit (Limited Edition)" title="Tamiya 84294 - 1/10 RC TA05-VDF II Drift Chassis Kit (Limited Edition)"
alt="Tamiya 84294 - 1/10 RC TA05-VDF II Drift Chassis Kit (Limited Edition)" title="Tamiya 84294 - 1/10 RC TA05-VDF II Drift Chassis Kit (Limited Edition)"
alt="Tamiya 84294 - 1/10 RC TA05-VDF II Drift Chassis Kit (Limited Edition)" title="Tamiya 84294 - 1/10 RC TA05-VDF II Drift Chassis Kit (Limited Edition)"
alt="Tamiya 84294 - 1/10 RC TA05-VDF II Drift Chassis Kit (Limited Edition)" title="Tamiya 84294 - 1/10 RC TA05-VDF II Drift Chassis Kit (Limited Edition)"
alt="Tamiya 84294 - 1/10 RC TA05-VDF II Drift Chassis Kit (Limited Edition)" title="Tamiya 84294 - 1/10 RC TA05-VDF II Drift Chassis Kit (Limited Edition)"
alt="Tamiya 84294 - 1/10 RC TA05-VDF II Drift Chassis Kit (Limited Edition)" title="Tamiya 84294 - 1/10 RC TA05-VDF II Drift Chassis Kit (Limited Edition)"

Track-Focused Drift Chassis from Tamiya

The Tamiya 84294 - 1/10 TA05-VDF II Drift Chassis Kit brings a race-oriented layout to the garage builder. This limited edition emphasises chassis flex control and setup range so drivers can fine-tune handling for consistent slides.

Flexible Frame and Efficient Powertrain

Designed around a single vertical frame and a revamped carbon fibre lower deck, the TA05-VDF II increases roll compliance without losing stability. The triple belt drivetrain, aluminium motor bulkhead and lowered spur position help smooth power transfer during extended drifts.

Steering Precision and Quality Components

Parallel steering geometry expands setup options and works well with the kit's TRF-style dampers, short reversible arms, front ball diff and rear direct coupling. Those parts give a strong base for tweaking toe, camber and steering response.

Specifications

  • Scale: 1/10
  • Construction type: Assembly kit
  • Terrain: On-road
  • Drive-train: 4WD
  • Drive type: Belt
  • Suspension: Fully independent double wishbone
  • Steering mechanism: Bell-crank
  • Shock damper: Oil-filled, aluminum
  • Bearings: Shielded ball bearing
  • Chassis material: Carbon fiber plate
  • Special features: Triple belt drive-train, TRF components
  • Requires: 7.2V battery & charger, radio gear, servo, receiver, wheels, tires, body set, motor, ESC, polycarbonate paint

Experienced builders will appreciate the TA05-VDF II for its balance of compliance and precision. With careful setup this chassis rewards practice with consistent drift lines and predictable behaviour.

The vertical frame increases roll flexibility, allowing the chassis to absorb corner transitions more smoothly and sustain controlled slides as you change steering and throttle inputs.
The carbon fibre lower deck is intended for on-road drift surfaces and track environments; it provides tuning options for both smooth and slightly rough asphalt conditions.
Start with damper oil weight, spring rates and rear coupling preload. Small changes to toe and steering rack position can have big effects on how the car enters and holds a slide.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved